Scout Racing Cam Profiles
$175.00 per set of cam lobes.
I am in the process of measuring all these cam lobes. The one on the right "Chief SS" is my own design in the "old school" manner with seperate base circle, lobe circle, and ramp radius circles CNC milled into the lobes. The Bonneville, Shunk"74", and the Ollie are shown for comparison only. The Ollies are available, but the Bonneville, and the Shunk"74" are not available at this time. I will be coming out with more designs in the future. For now, the Ollie is a good replacement for an original Bonneville cam, and my "Chief SS" is a hot cam for lighter "Bobbers" desiring more high rpm power. A low gear, or 4 speed/overdrive is recommended, as well as a CV carb setup. The "Chief SS" cam makes strong higher rpm power!
Here you can see my racing lifters in the cam case with (2) of my early
dished flank cam prototypes.
See my "Tech Talk" section for instructions on installing cam lobes"
CONTACT INFORMATION:
James R. Mosher
(505) 466-7870
